tombik
New member
Thank You Affogato. One question. Are you sure that I can use this soft for reset in 1200S?. There is an information that no connection with machine.
So how to do it ?
So how to do it ?
Help Please: Many people looking for the WMF Konfig Tool for Various WMF Machines
- Thread starter setunia40
- Start date
alexbc
New member
Hey Affogato 
Do u also have the Prestolino Config Software.. It kinda works also with the Presto Firmware but im not sure if all values are good for the boilers and stuff
Do u also have the Prestolino Config Software.. It kinda works also with the Presto Firmware but im not sure if all values are good for the boilers and stuff Affogato
New member
Hey Affogato
No i do not have that one sorry. I dont understand WMF, they sell machines but they wont give/sell the software to maintain the machine. Apparently they dont even make coffee machines anymore. Strange that konfigtools for every model havent leaked by now?
Affogato
New member
TL;DR My Presto machine got B.S.O.D and i found a solution, oxidizied connections.
So my machine started to act up again, it would restart sometimes and sometimes just crash with blue screen of death, panic.
Hooked it up to the konfigtool and got a nice connection with start up of the machine, then bam B.S.O.D, no connection or it said "Node not found" on konfigtool.
I interpreted that as something wrong with the display or loose cables, not a software problem as i first suspected.
Took down the front display and the copper circuit connectors seemed oxidized, black coating kinda.
scratched that of with a small flathead och wiped the connectors with alcohol, was on ok job, not great.
Mounted the front display and connected all the cables and yes it would start up and run, then B.S.O.D but this time it would start up again. over and over.
So then one time while B.S.O.D i tried to wiggle every cable-block(?) to see if one of these had a bad connection. And i found that it probably was a bad connection beacuse of oxidation. On the right side (when you stand infront of the display), the second cable-block from the top connected to the front display, gave that a wiggle and the machine would start up immediately and has since then worked as normal.
I took some pics and a video, will upload later and hopefully i will help someone else that has these problem in the future.
sparrrowhawk
New member
This is only for Presto, useless for WMF 800/900/1000...
GsxrPro
New member
Konfigtool
Anyone has konfigtool for 1200s?
Anyone has konfigtool for 1200s?
Lukasz
New member
I dont want to piss off Affogato, but anyone has got konfigtool for 2000s? i have tried all of the links, but one accually worked for me was on dropbox, maybe this way?
chkathome
New member
Does anyone have the configtool for a WMF 900?
All links above are broken.
I would be happy if someone shares it.
I just need it for private purposes to maintain my WMF 900.
All links above are broken.
I would be happy if someone shares it.
I just need it for private purposes to maintain my WMF 900.
sparrrowhawk
New member
chkathome
New member
Only for Presto...
For 800/900/1000 I search it too!
Thanks for your fast answer.
I hope someone could share it, but it's nearly impossible to get the tool.
I just want to keep my beloved machine running.
Sunsys
New member
I am still looking for the Bistro! 8400 software version. Does anyone have this version and can help? Please!
Affogato
New member
A friend of mine owns a WMF 1500S, does anyone know if and when they changed software. Is it same setup, usb, konfigtool etc?
I understad that older wmf machines is discontinued, but WMF presto, 1200, 1400, 1500, CombiNation etc. Are they discontinued?
How do i update a new wmf machine?
We need all the software programs!
After scrolling through this thread, it appears that there is a lesson here: Don't buy a WMF Machine, because you'll be sorry.
topcoffee
New member
i have it
i have this, but i can't post the link
Hey Affogato
i have this, but i can't post the link
topcoffee
New member
i will try again later
