Help Please: I am Looking For a Nuovo Simonelli Mac 2000v Manual

[Bottomcrawler]

New to the forum and in search of a User Manual and a Service Manual for my Nuovo Simonelli MAC 2000v.
if anyone could attach one or direct me to a downloadable copy, I would be very grateful.
Michael

 

[Musicphan]

Should be ablet to find it here - if not email them.. https://simonelliusa.com/products/all-equipment-documents-archive.asp

 

[sbrandes]

Here is the link to the direct files as two of them were too large to download. Those were the parts book and the brochure. When I called nuova simonelli to ask if they had these files anywhere, they said they did not. They were sitting on the website though. Hope this helps! https://simonelliusa.com/products/all-equipment-documents-archive.asp#menu006

New to the forum and in search of a User Manual and a Service Manual for my Nuovo Simonelli MAC 2000v.
if anyone could attach one or direct me to a downloadable copy, I would be very grateful.
Michael

 

[RayCharles]

Bottomcrawler I'm about to start a rebuild journey with the MAC 2000V, any lessons learned to share?​

 

[LoudonMiller]

I just started a MAC 2000V rebuild also. Just tested the as-found unit yesterday. Boiler filled and got hot! Still much to do.

 

[RayCharles]

I just started a MAC 2000V rebuild also. Just tested the as-found unit yesterday. Boiler filled and got hot! Still much to do.

I'd like to coordinate with you as you progress if possible. would like to piggyback on your part (order) numbers if you are ordering all the orings, etc.

 

[RayCharles]

On the MAC 2000V- i was finally able to get 220 installed in my garage and plugged it up for the first time. It lit and it seems like the pump started which is a good sign. However, I quickly turned it off because i have no water line connected.

The question i have is what is the water pressure i need for the input? For troubleshooting, I would like to get a 5 gallon water bottle and use a water pump to pump water as the source. However, the only thing i can find for the source pressure is 4 bars which to foreign to me. I will be looking for a water pump with a variable pressure but again, what PSI is needed for the source water pressure?

Also, i'm seeking a black "safety tray" which sits in the bottom front and has 2 screws on each side. My left side of the tray is literately gone from rust so I need to replace it.

 

[LoudonMiller]

I've got my unit's plumbing disassembled and in a citric acid bath. Although it was dirty as sin, I only found one line completely plugged.

The boiler and element had a smaller amount of scale, not too bad. Into the bath also.

 

[LoudonMiller]

On the MAC 2000V- i was finally able to get 220 installed in my garage and plugged it up for the first time. It lit and it seems like the pump started which is a good sign. However, I quickly turned it off because i have no water line connected.

The question i have is what is the water pressure i need for the input? For troubleshooting, I would like to get a 5 gallon water bottle and use a water pump to pump water as the source. However, the only thing i can find for the source pressure is 4 bars which to foreign to me. I will be looking for a water pump with a variable pressure but again, what PSI is needed for the source water pressure?

Also, i'm seeking a black "safety tray" which sits in the bottom front and has 2 screws on each side. My left side of the tray is literately gone from rust so I need to replace it.

Two basic options for plumbing water to your machine:

Hookup to your domestic water system:

Water Softening and Filtration System

Overview This combination water softener and filter system contain everything you need to connect your espresso machine to your water source and protect it at the same time from mineral deposits. The filter housings are generic 10", therefore you won't be tied into expensive proprietary...

www.chriscoffee.com

Hookup to bottled water:

Demand Pump

Overview This devise works off of back pressure, so when the machine calls for water the pump will kick on and draw the water from the bottle. When machine is done filling the valve inside the machine will shut off and the flow of water will stop. BW-5000 Rated for .5 GPM.

www.chriscoffee.com

 

[RayCharles]

I've got my unit's plumbing disassembled and in a citric acid bath. Although it was dirty as sin, I only found one line completely plugged.

The boiler and element had a smaller amount of scale, not too bad. Into the bath also.

How did you make your citric acid bath? If you have a MAC 2000V 2 Group, would you share a parts list with all the orings and any MODs you plan to do?