Help and Information Please: Konfigtool WMF software

[Affogato]

Download the software, i think you need some sort of a hardware/dongle device to access the coffeemachine? if you have any info on this and how to solve problems on WMF/Schaerer machines SHARE!!
https: / / www(DOT)dropbox(DOT)com/s/6o3e7ibk36hvkel/setup-Presto-KD-Ver-5-2-1--2014-07-23.exe?dl=0

 

[Mins95]

Thank, my friend

it's ok for me.

This software, simply has the extension for presto (WMF 1400)

My configuration:
Surface Pro
windows 10
Cable "usb B"

everything works perfectly.

 

[Mins95]

Konfig Tool - https://mega.nz/#!FyBA0CQD!tNrK0xwjlh4KVNQ8C6r7f2lwmjc2CffyGXnDA5fOa9k

 

[schiena]

Hi, should this work with Schaerer Siena? I need to increase steam temperature on 2 machines. Please let me know.
Thank you

 

[Affogato]

Dont know, try i out. But i know that WMF and Schaerer is kinda the same machines so

Hi, should this work with Schaerer Siena? I need to increase steam temperature on 2 machines. Please let me know.
Thank you

 

[elielhunter]

Hi guys

someone could tell me the configuration of the recipes.
Because the drinks of my WMF presto gives them a lot of coffee.

If someone has the configuration values, I would greatly appreciate it.

Regards..

 

[Affogato]

Thank, my friend

it's ok for me.

This software, simply has the extension for presto (WMF 1400)

My configuration:
Surface Pro
windows 10
Cable "usb B"

everything works perfectly.

Got hold of a cable with usb-b for my WMF presto machine on ebay, lucky me!
Used almost the same set-up:
Windows 10 Laptop
USB A to B
And Konfigtool

hooks up great, and i can change my setup, check errors and so on.
BUT how do i save my changes to the machine? could not find an "Save" button etc
How did you guys do it?
:coffee1:

 

[Mattias75]

I need the cable 10 pin
anyone know where i can fin it?

 

[collonil]

Does the konfigtool work with my wmf800?

 

[ramunas]

hello. i need help with connection to machine. Usb Port Com3 and drivers connection is ok, but i'm getting massage : "no connection to machine" .

coffemachine WMF 1200s

 

[Sunsys]

Hi there,
does anybody got the KonfigTool extension for the WMF Coffea Machine or the complete Software?

 

[Affogato]

Hi there,
does anybody got the KonfigTool extension for the WMF Coffea Machine or the complete Software?

i found this link in another forum
https://sharefiles(DOT)app/download/bdefeb572b17b9959777d023339b29890f172e42

 

[ramunas]

link is broken, please sent new to pm

 

[Sunsys]

link is broken, please sent new to pm

unfortunately link is down. Set the dot right of course.

Reward for the WMF Coffea Model files, a firmware file would help me too. Any suggestions?

 

[schiena]

Files

link is broken, please sent new to pm

Seems like the download was only active for 24 hrs. I could use the sw also. LMK if u find it.