💵 For Sale ARC 800 Roaster (SW New Hampsire)

REDrum

New member
Joined
Feb 12, 2012
Messages
15
Reaction score
0
ARC 800 For Sale. 800g development roaster. New, never used and set up. This unit is configured for LP and comes with an air flow meter ($185 extra).

Also comes with spare LP hose, gaskets. All set up parts and valves are shown in the photo below

I will include the 72" x 30" stainless steel roasting table too, if buyer pays full asking price ($500 value)

Price is $4,500 (approximately $1,000 less than a new one with shipping)

Roaster is located in SW New Hampshire, near Keene. I am not interested in shipping as it is about 80 pounds, and would need to be crated.
 

Attachments

  • IMG_4881.webp
    IMG_4881.webp
    1.8 MB · Views: 80
  • IMG_4880.webp
    IMG_4880.webp
    1.9 MB · Views: 62
  • IMG_4879.webp
    IMG_4879.webp
    2.3 MB · Views: 62
Last edited:
I don’t know the OP personally. However, I am familiar with these roasters. While I don’t own this particular roaster, I do have a 2023 BC-2, and the two machines are very similar. Several of the parts appear interchangeable and would likely fit my roaster without any modifications. The Magnehelic pressure gauge is a nice add-on that helps tremendously with air flow information


My point is that this is a very good deal on a roaster that is built like a tank. These machines are capable of producing excellent coffee for many years with minimal—if any—need for replacement parts. I purchased a roaster through Showroom Coffee, and they are terrific when it comes to support for these roasters.


As I mentioned, I don’t know the seller, but I do know the quality of what’s being offered.
 
ARC 800 For Sale. 800g development roaster. New, never used and set up. This unit is configured for LP and comes with an air flow meter ($185 extra).

Also comes with spare LP hose, gaskets. All set up parts and valves are shown in the photo below

I will include the 72" x 30" stainless steel roasting table too, if buyer pays full asking price ($500 value)

Price is $4,500 (approximately $1,000 less than a new one with shipping)

Roaster is located in SW New Hampshire, near Keene. I am not interested in shipping as it is about 80 pounds, and would need to be crated.

Is this still available?

I believe you might be the same person on Facebook I just messaged. I sent you a friend request and a message. I am definitely interested and would like to chat when possible. If this is indeed the same person on Facebook message me on there and I will give you my phone number. If not DM me here and we can link up.
 

Premium Sponsors

Back
Top Bottom