Maryk
New member
Hello!
I got a Delonghi PrimaDonna Deluxe S ESAM 28.465.M car from another service. The screen does not display information, only the backlight is on. It does not respond to buttons, including the power button on the front panel near the display. However, if you hold down the power button and apply power, the display shows the inscription UART MODE, while it also does not react to anything. I checked the hardware and found no problems. Based on this, I assume that the problem is possibly in the firmware.
I am looking for a set of firmware for the display and power boards, as well as EEPROM 24C 512.
Display board:
BRD02405R00
5213220471-09
SW 01.1.000
Power board:
BRD02465R01
5213220931-10
SW 02.0.000
I got a Delonghi PrimaDonna Deluxe S ESAM 28.465.M car from another service. The screen does not display information, only the backlight is on. It does not respond to buttons, including the power button on the front panel near the display. However, if you hold down the power button and apply power, the display shows the inscription UART MODE, while it also does not react to anything. I checked the hardware and found no problems. Based on this, I assume that the problem is possibly in the firmware.
I am looking for a set of firmware for the display and power boards, as well as EEPROM 24C 512.
Display board:
BRD02405R00
5213220471-09
SW 01.1.000
Power board:
BRD02465R01
5213220931-10
SW 02.0.000
